Homer Glen Solar Panel Removal and Reinstallation by Procedure

Taking a solar array off a roof so the shingles beneath it can be replaced is often described as if it were simply a matter of unbolting panels, yet the array is a live electrical installation fastened through the one surface that keeps water out of your home, and both of those facts demand respect. Solar Panel Removal Homer Glen therefore works through the same procedure on every house, beginning with a record of the system as it stands: a set of photographs covering the array, the way the strings are laid out and the wire routing, together with a generation figure that later becomes the yardstick for the finished job. Only after the system has been de-energized in the proper order do our technicians release the clamps and lift away modules, rails and conduit, and each module is marked with a code that ties it to a slot on our layout sheet before the whole set travels to protected storage for the duration of the reroof. When the roofer has finished, fresh attachment points go into the new roofing, each one sealed with its own new flashing to the shingle maker's specifications, after which the modules are hung back in their coded slots, the circuits are restored, any required inspection is completed and the array's generation is compared with the figure taken at the outset. The homeowner receives the photographs, the layout sheet and the closing readings, a record that is particularly useful on the larger arrays common in Homer Glen.